12
watch are connected, the mobile phone will vibrate and ring by single touch the “Find
Phone” interface.
(2) Operation instruction
：
On/Off: Open “H Band”-->Setting-->My device-->Findphone ON/off, then the
user can turn on or turn off the “find phone” function.
FindPhone: Slide to “findphone” interface,
as shown in Figure 3-1-11, single
touch “Findphone” start to find the combined mobile phone.
，
the interface is
as
shown in Figure
3-1-12
Exit: when find phone, single touch the “FINDPHONE” again will end the function.
It
will automatically exit this function after finding the phone for one minute.
1.7 Stop watch
(1)
Function introduction: this function can be set in APP, when the state is “ON”,
the user can use this function on Watch.
(2)
Operation instruction
：
ON/Off: Open “H band” -->Setting-->My device-->Stop watch on/off, then the stop
