tone. A low tone will be heard when iron is found and arrow will point to nail
/ bottle cap. Also LCD displays the probable depth of target.
3. Press MODE again to choose DISC mode.
Then choose the unwanted
target as follows:
a. Press MODE, the arrow pointing to nail / bottle cap flashes. This means
nail, bottle cap or iron object will be ignored. The detector will have no
reaction to these objects.
b. Press MODE again to move the flashing arrow to 5 cent / 1cent / pull tab
/ s-cap. At this time, 5 cent / 1cent / pull tab / s-cap will be ignored. The
detector will have no reaction to these objects.
c. Press MODE again after the above unwanted target is chosen, one more
flashing arrow pointing to nail / bottle cap will flash. This means the
detector will not have reaction neither to iron nor to 5 cent / 1cent / pull tab /
s-cap.
Note:
-
25 cent / 10 cent can
’t be ignored. Because they are made of valuable
material.
-
Flashing arrow will point to what the user would like to eliminate. If the
user doesn’t detect any metal, the arrow will keep flashing. Once the
user detects the metal objective, the flashing arrow will disappear and
another arrow turns up to point out the Target Indicator. At the same
time, the detector emits a tone. This arrow for Target Indicator will stay
on LCD display around 10 secs. If there is no other metal objective
which has been detected, the arrow will disappear.
- When you go back to detect, the flashing arrow for eliminated metal
won’t be back. Therefore, please remember which metal you have set
up to ignore.
A detailed setting of discrimination is as below for your reference.
Discrimination Settings:
6
