Locking Pin
Washer
Insert the Back Deck lying flat. Insert one
end first, then gently lower the other end into position.
Remember that the Bolts on the
Arm should be LOOSE.
Be careful not to scratch the Arms
with the Plastic Runners when you
lower the ends of the Back Deck.
This step can be tricky - it is best
done with two people
CAREFUL!
These can
scratch the
Arms.
All four joints
must be left
LOOSE.
When you have the Back Deck fitted lying flat,
tighten all the Bolts. From the back, lift the
Back Deck to upright as illustrated.
A.
B.
Fit the seat deck between the Arms and
into the Back Deck as shown. Use the
Clevis Pins to connect the two decks.
Secure with a Washer and Locking Pin.
The Seat Deck has a
sticker to indicate the top.
Clevis Pin
Clevis Pin
Your arm style may vary
BIFOLD FUTON FRAME
Assembly Instructions
Chair
Full/Double
Queen
Love seat
Page 4 of 4
Fit Back Deck into Position.
4A
Fit Seat Deck into Position.
4B
Queen size only: Attach short legs.
4C
See separate page enclosed in this box for Operating Instructions.
i
1PA-1001
THIS END
FRONT
Tighten all the Bolts
Using the extra 50mm bolts,
attach the Queen short legs
to the back deck.
Important Note:
Orientation of the Queen
Short Leg, note that the
exposed part of the metal
nut in the leg should be
oriented away from the bolt
for proper assembly.
Exposed part of
the metal nut
50mm Bolt
Queen short leg
