Gold Apollo AL-A07, Руководство пользователя

Страница: 6 / 16

System set up
Perform the following steps to prepare your All-in-One system &
AL-A07 pagers for operation:
1. Connect All-in-One transmitter with power adapter.
2. Lock the antenna to the transmitter.
3. Place all AL-A07 pagers into the charging slots. Make sure all
the pagers are pushed all the way to the end until you hear
“click”. The solid LED red light indicates that the pager is
placed in the charger properly.
Calling Pagers
Manual Programming
You can program the pager numbers manually. All the pagers will
be assigned with a new number in sequence.
1. Place all the pagers in the charging slots properly.
2. Press and hold key “1” and turn on power.
3. Enter password “456” and press “Send” to enter programming
mode.
4. After programming is complete, all the pagers will be assigned
with a new number in sequence (depends on the number of
pagers placed in the charger).
To call a pager, simply press the pager number you would like to
call, then press “SEND”.
*Once the pager has been taken out the charger, the AIO will
send a signal to alert the pager, confirming the pager is
working.
Operation
4