9
NOTE: NO password required for camera/NVR in default. You can jump to page-11
to change camera’s
password.
NOTE: If
you want to access the camera over internet, choose cloudID in “Login Type”
6. Once the software has connecte
d the camera successfully, the “Status” will change to
“connected”
Optional 1: What should you do when IP address get conflict?
1.
Mark the checkbox ”In order to login device, modify IP automatically” at the lower right corner.
NOTE: once you mark the checkbox, the software will change the IP camera automatically to avoid the
conflicts.
2. Return
back to step 3. Click “IPV4 search” again. Following step 4 and step 5 until you add all
the camera successfully.
Optional 2: How to add the cameras to CMS5 outside of LAN
.
1.
Click “Manual Add” button at the lower right corner. A new dialog appear.
2. Name the camera, Choose the login type.
NOTE: if you didn’t configure the port forwarding in your router, you properly need to choose the cloudID in
login type.
