Regulator heating type ES2000
Part No. 05 220 52 a
3 / 12
ASSEMBLY
Before assembling, check that the product is complete and has not suffered any damage
during transport.
ASSEMBLY has to be carried out by a specialised company.
For the system to function as intended it must be installed professionally in compliance with
the technical instructions applicable to the planning, construction and operation of the entire
system.
WARNING
Danger of explosion!
Install the power supply unit outside the potentially explosive area.
Otherwise there is a risk of malfunctioning or explosion.
Install in a dry room.
Figure 1: Application example - heater unit is installed in ex-zone 1 or 2
•
The power supply unit
must be installed outside ex-zone 1 or 2
.
•
The heater unit
must be installed directly on the pressure regulator.
•
The heater unit
can be safely installed in ex-zone 1 or 2
.
