CHANGING DPI RESOLUTIONS
SAFETY WARNINGS
Press
HINTS AND TIPS
Mouse Not Working:
1. Check that the power switch is in the ON position.
2. Make sure the Nano Receiver is fully plugged into a USB port and the
computer is on or try the Nano Receiver in a different USB port.
3. Check battery installation. Replace batteries if needed.
4. If mouse performance is slow or intermittent around a wireless network,
unplug the Nano Receiver from the USB port and then reinsert it. To
reactivate the mouse, switch it on, off and on again using the ON/OFF
switch on the bottom of the mouse.
5. Repeat the connection procedure. You can also try moving the mouse
closer to the Nano Receiver.
6. If the mouse is moving erratically change the working surface which the
mouse is operating on.
Press and hold the left mouse button and scroll wheel for about 3 seconds.
Choose your preferred DPI: 800 - 1200 - 1600dpi.
To Reduce the Risk of Injury:
• Keep batteries out of the reach of children.
• Do not heat, open, puncture, mutilate, or dispose of batteries in fire.
• Do not allow metal objects to touch the battery terminals on the device; they
can become hot and cause burns.
Wireless Devices:
Before boarding any aircraft or packing a wireless device in luggage that will be
checked, remove the batteries from the wireless device.
Wireless devices can transmit radio frequency (RF) energy, whenever batteries
are installed and the wireless device is turned on (If it has an On/Off switch).
Battery-Powered Devices:
Improper use of batteries may result in battery fluid leakage,
overheating, or explosion.
Released battery fluid is corrosive and may be toxic. It can cause skin and eye
burns, and is harmful if swallowed.
Features and specifications are subject to change without prior notice.
Windows is a registered trademark of Microsoft Corporation in the United
States and other countries.
DSG International Sourcing declares that the wireless keyboard compies with
the essential requirements and other relevant provisions of R&TTE Directive
1999/5/EC.
Notes for battery disposal
The batteries used with this product contain chemicals that are harmful to the
environment. To preserve our environment, dispose of used batteries accord-
ing to your local laws or regulations. Do not dispose of batteries with normal
household waste.
For more information, please contact the local authority or your retailer where
you purchased the product.
Visit Partmaster.co.uk today for the easiest way to buy
electrical spares and accessories. With over 1 million
spares and accessories available we can deliver direct
to your door the very next day. Visit www.partmaster.co.uk or call 0844 800
3456 (UK customers only) Calls charged at National Rate.
The symbol on the product or its packaging indicates that this
product must not be disposed of with your other household waste.
Instead, it is your responsibility to dispose of your waste equipment
by handing it over to a designated collection point for the recycling
of waste electrical and electronic equipment. The separate collection
and recycling of your waste equipment at the time of disposal will
help conserve natural resources and ensure that it is recycled in a
manner that protects human health and the environment.
For more information about where you can drop off your waste for
recycling, please contact your local authority, or where you
purchased your product.
(QSG-GYCNM13-140212V2)
• Your product complies with CE rules.
• This product has no serviceable parts. Use of controls or adjustments of
procedures other than the Quick Start Guide may result in danger.
DSG Retail Ltd. (co. no. 504877)
Maylands Avenue, Hemel Hempstead, Herts., HP2 7TG, UK
SPECIFICATIONS
Dimensions
Working Voltage
Rated Working Current
Wireless Frequency
Operating Range
Resolution
100(L) x 70(W) x 38(H) mm
DC 1.5V x 2
< 10mA
2.4GHz
8m
800, 1200, 1600 dpi
Optical :
Never point the optical sensor towards the face, particularly the eyes,
to avoid possible injury.
GYCNM13_QSG_RC_140212_Zell.pdf 2 12/2/14 6:12 pm
