Goji GONBT15, Инструкция по эксплуатации, Страница: 10 / 16

10
Bluetooth Pairing
1. Ensure the headphones is switched off.
2. Press and hold
for 7-8 seconds to enter
Bluetooth pair mode. The red and blue indicator
starts flashing rapidly and alternately.
• You can also use the 3.5mm audio cable
to connect to your audio device. Operate
from your music player or mobile device to
adjust the volume or music.
• The Bluetooth feature will disable while
using the 3.5mm audio cable.
If no Bluetooth device is paired within 3
minutes, the headphones will enter Standby
Mode.
3. Activate the Bluetooth feature on your Bluetooth
device and start searching. Then select “GONBT15”.
4. If necessary, enter the passcode, “0000”, to pair and
connect the headphones. Some device also ask to
confirm the headset connection after paring.
5. The blue indicator will blink every 7 seconds and the
headphones will beep after you have successfully
paired the headphones.