16
Setting the Alarm
• The Unit provide two alarm setting that work
independently from each other thus allowing you to
customize each one to your preference , you can set the
alarm and the source of alarm
• For setting the Alarm time of the clock,
1. In standby mode, press and hold VOL+/AL1 button on
the top of the unit, the alarm 1 displayed on the left of
the screen will have a red LED light next to the AL1.
The hour digits will star to flash
2. Press or button to adjust the desired hour. and
press VOL+/AL1 button to confirm.
3. Press or button to adjust the desired minutes.
4. Press VOL+/AL1 button once, you will see the “Buz”
come on the LED screen, press or button , you
will scroll through the 3 options available .”Buz” is for
Buzzer, “FM” is for FM radio, and “iPod” for the iPod/
iPhone.
5. Press VOL+/AL1 button once, you will now see
number, press or button to adjust the alarm
volume between 10-32. 10 is the lowest the alarm
volume will go, and 32 is the highest, alarm volume
automatically starts at 15.
Repeat the same Operation to set Alarm 1 as above,
to Alarm 2 using the VOL-/AL2 button.
GCRLIN_R_W14_IB_20140619_will.indd 16
19/6/14 5:04 PM