GoHigh EP310-H Series, Руководство пользователя

Страница: 40 / 71

User Manual
39
6.7.11
VPN
This function should use our private VPN server software.
VPN server addr: fill in VPN server public IP address
VPN server port: fill in 12000 if you do not modify the VPN server config
SIP 1 server register address : fill in VPN server VPN address 172.0.0.5 if you do not
modify the VPN server config. Others sip parameter needn`t change.
If you want to use VPN function ,It need the below condition.
1 It need to use our VPN software
2 Operation system should be linux, not windows2003
2 SIP server software and VPN server software place in one server hardware.
3 SIP side must monitor the VPN tunnel packets.
More VPN detail introduction please refer to the user manual accessories
[
Accessories 1 VPN manual
]
6.8 Dial Peer
Number IP Table Configuration
Function of number IP table is one way to implement the phone's calling online, and
the calling of the phone will be more flexible by configuration the number IP table.
For example, user know the other party's number and IP and want to make direct call
to the party by point-to-point mode
：
the other party's number is 1234
，
make a
configuration of 1234 directly ,then the phone will send the called number1234 to the
corresponding IP address
； Or set numbers with prefix matching pattern ， for example,
user want to make a call to a number in a certain region （ 010 ） ， user can configure the
corresponding number IP as 010T ― protocol ― IP ， after that, whenever user dial
numbers with 010 prefix( such as 010 － 62201234),the call will be made by this rule.
Bases on this configuration ， we can also make the phone use different accounts and
run speed calling without manual swap. When making deletion or modification,
select the number first and click load, then click Modify and complete the operation.