●
If you find there’s only one bar flashing slowly, the battery level is low; it’s
advised to replace the batteries soon.
●
If the last bar flashes quickly, the battery level is pretty low. The
Smartscooter® will enter “Pre-crawl home mode”, the speed of the scooter will be
limited to save electricity, and a sound alert will beep every 20 seconds. It’s advised
to replace the batteries as soon as possible. If the Smartscooter®is under motor
shutdown mode, it’s advised to replace batteries within 24 hours or the next time
the motor is turned on into standby mode (the earlier one).
●
When the last bar disappears, the batteries have very few power remaining
and the scooters enters “Crawl home mode” with the top speed limited to approx.
25 km/h, and a sound alert will beep every 20 seconds. The “RANGE” display on the
dashboard appears as “------” without the mileage figure. At this point, the batteries
can run out any time. Please replace the batteries immediately. If the
Smartscooter®is under motor shutdown mode, please replace batteries within 24
hours or the next time the motor is turned on into standby mode (the earlier one).
●
The scooter will regain its normal performance once the batteries are replaced.
Overheat/Low Temperature Protection
●
Under extreme circumstances, such as riding at high speed for a long time, or
climbing up hills continuously, there is a possibility that the temperature of the
batteries will rise. When the batteries are overheated, in order to protect the battery
function and lifespan, the Overheat Protection will be activated, and the orange
System Overheat Warning symbol on the dashboard will light up. During
Overheat Protection Mode, the system reduces power output automatically.
●
Therefore, when the
System Overheat Warning symbol turns on, please
exchange your batteries at a nearby GoStation® immediately. The system will revert
to normal status and you can continue riding.
● The performance of the batteries is affected by the temperature, hence when the
weather is cold, Low Temperature Protection might be activated, the blue
“Low temperature” icon lights up, and you might feel the power of Smartscooter®
drops.
● Keep riding and wait for the temperature of the batteries rises, or exchange your
batteries at a nearby GoStation®.
19
Note:
(Models with iQ System® Smart Keycard)
When the last bar disappears
and the Low Energy Mode is activated, the Smartscooter® enters hibernation
mode once it is locked over 3 minutes and cannot be unlocked with the iQ
System® Smart Keycard.
You need to long press the
”GO” button to
deactivate the hibernation mode.
(Please refer to 2.
Locking, Unlocking, Power On
and Opening Trunk -
Hibernation mode)
