the greatest length.
－
Set the cutting length by pressing the slide button and pushing the slide block with your thumb
to the one you desire.
－
Pushing the slide block upward makes the cutting length shorter.
－
Pushing the slide block downward makes the cutting length longer.
－
There are 4 cutting lengths available (0.8/1.2/1.6/2.0mm).
－
Two guide combs with 4 lengths (3-6mm/9-12mm)
－
Attach guide combs in accordance with the cutting length you desire.
Brushing
Clipping
To achieve a precise cutting, it is recommended to brush the hair against the direction of growth and
cut in the direction of growth.
▼ Attaching guide comb
· Guide combs should be installed by first hooking the blade teeth to front side of guide comb. Then
push the snap tabs on both sides of the guide comb until it snaps into place.
· To remove, press the snap tabs down.
How to give a hair cut
▼ An overall cutting
①
Attach the guide comb with the desired length and adjust the cutting length
②
Make yourself familiar with the direction of growth of the individual body parts
when brushing up and always cut in the direction of growth
· Apply gentle pressure so that the blade or attachment comb touches the skin evenly
when cutting
▼ Fine trimming
①
Repeat the above steps 3 times to achieve a particularly even clipping.
Adjust speed
▼ Speed control
－
Speed range: 5000-7000 RPM
－
Adjust speed by pressing “-”and“+”.
▼ Intelligent constant speed
The clipper runs constantly at the setting speed.
LCD display
▼ Speed indication
－
5 speeds available
Speed 1: 5000 RPM
EN
