
ENG
ENG - 35
ii. CharGinG The baTTeries
Connect the main power lead to the charger socket.
Plug the mains adaptor into a 230V AC ,50Hz main socket with the switch on the socket set to
OFF.
Then switch on the main socket.
The PMR must be charged using the mains adaptor provided. Using any other adaptor will
result in non-compliance with EN60065 and will invalidate any approvals & warranty.
place the handsets in the Charging cradle.
The charge light comes on when a handset is put on charge
It takes about 10 hours to recharge the batteries fully if they’ve become completely run down.
New batteries take up to 14 hours to charge fully.
battery meter
The battery meter is located in the left corner of the LCD panel. It looks like a battery with three
bars inside. These indicate the amount of power available. As the power is used the bars will
disappear. When the battery level reaches its minimum level, the handset will emit two beep
tones and automatically turn OFF the power.
battery life
The WT57 has a built in power saver feature to make the batteries last longer. But when you are
not using the handset, it‘s better to switch it off to save the battery power.
Содержание WT57
Страница 49: ...Pozn mky Notatka Notes...
Страница 50: ...Pozn mky Notatka Notes...
Страница 51: ...Pozn mky Notatka Notes...
Страница 52: ......