EN - 25
EN
Electrostatic Discharge hints
- The unit may reset or many not reset to normal operation
mode due to electrostatic discharge, just switch if off and reconnect again
SETTING THE FUNCTION MODES
To change the function modes, press the
FUNCTION/
button repeatedly to choose
USB / BLUETOOTH / AUX / RADIO function.
ADJUSTING THE VOLUME
•
Rotate the
VOLUME
knob on the unit to increase or decrease the music volume.
•
Press the
MIC VOL. +/-
buttons on the unit to increase or decrease the microphone volume.
BASS ADJUSTMENT
Press the
SUPER BASS
button on unit to increase the bass effect.
EQUALIZER (EQ) FUNCTION
This unit has a built-in equalizer system, Press the
EQ/ECHO
button on unit to select a setting
that best matches the music style:
FLAT, CLASS
(Classic)
, ROCK, POP
and
JAZZ
.
USB CHARGING
This unit provides a 5V / 1A USB charging port for charging your smart phone. First connect
the USB charging cable (cable not provided) to the mobile device and then connect to the USB
charging port on the unit.
Note:
•
Devices cannot be charged when the unit is off due to low battery.
•
When you make the AUX connection and USB charge connection to the same mobile device,
first connect the mobile device to the USB CHARGE port for charging and then make the AUX
connection. Charging may not start if the AUX connection is made before USB charging.
MICROPHONE ECHO ADJUSTMENT
Press and hold the EQ/ECHO button on unit to turn on or off the microphone echo effect.
FLASHING LIGHT
There are 5 modes for the LED lighting. Press the
LIGHT
button to choose the light modes.
Mode
L-1
: Blue light stays on
Mode
L-2
: Red light stays on
Mode
L-3
: Green light stays on
Mode
L-4
: 7 color light flashing follow the music
Mode
L-5
: 7 color light flashing smoothly
Press one more time to turn off.
There are two light bars around the speaker, the light will flash in all light modes, press the
LIGHT
button to OFF mode to turn off all the lights on the front together.
Hold
LIGHT
to turn on/off light on control panel.
RADIO OPERATION
Listen to FM radio broadcasts. Press the
FUNCTION/
button on the unit, the display reads FM
and the radio frequency.
Note
: The wired antenna is packed as a separated accessory, insert the wired antenna into the
FM socket on the rear cabinet when listening to the radio, and extend the wired antenna to its
full length in order to get the best reception.
TUNING TO A RADIO STATION
If you know the station frequency that you want to tune to directly:
•
Tune to a station by press the
:
/TUN+
or
9
/TUN-
. button repeatedly. Hold them to search
upward or downward. The station frequency is shown on the display.
