Gogen MAXIRADIO, Инструкция по эксплуатации, Страница: 31 / 44

EN - 31
EN
CD / MP3 OPERATION
General operation
Press to start playing CD / MP3 disc.
Press again to stop playing CD / MP3 operation temporarily.
Press again to resume playback.
SKIP + & Press to go to the next track or back to the previous track.
SKIP - Press and hold while playing until you find the point of the
sound.
STOP Press to stop all CD / MP3 operation.
Playback
1. Set the “FUNCTION” selector to “CD / MP3” mode.
2. Open the CD door and place a CD / MP3 disc with the label up in the CD compartment.
3. Close the CD door.
4. Focus search is performed if disc is inside.
For CD disc - Total number of tracks is read and appears on the display.
For MP3 disc - “MP3” appears on the display.
5. Press the “PLAY / PAUSE / USB” button to start playing CD / MP3 disc.
6. Adjust the “VOLUME” control to the desired level.
7. Press the “PLAY / PAUSE / USB” button again when you want to stop playback temporarily.
8. Press the “STOP” button when finished.
CD / MP3 OPERATION
Program
Up to 20 tracks can be programmed for disc play in any order.
Be sure to press the “STOP” button before use.
1. Press the “PROGRAM” button, the display will show “P01” and flash.
2. Select desired track by using the “SKIP +” or “SKIP -” button. (You may select a desired album
by pressing the “ALBUM” button).
3. Press the “PROGRAM” button again to confirm desired track into the program memory.
4. Repeat step 2 and 3 to enter additional tracks into the program memory.
5. When all the desired tracks have been programmed, press the “PLAY / PAUSE” button to play
the disc in the order you have programmed.
6. Press the “STOP” button twice to terminate programmed playback.
Mode
Press the “MODE” button before or during playing CD / MP3 disc, each press switches the mode
function as follows:
1 – REPEAT 1
2 – REPEAT ALBUM ( *MP3 ONLY )
3 – REPEAT ALL
4 – RANDOM
5 – NORMAL PLAYBACK
REPEAT 1
REPEAT
ALBUM
REPEAT
ALL
RANDOM
NORMAL
PLAYBACK
REP
REP
ALBUM
REP
ALL
RAND
&