Gogen DAB 12BT, Руководство пользователя

Страница: 42 / 68

EN - 42
SETTING THE CLOCK
The first time you plug your unit in the clock display “0:00“ will be shown. The clock on your
radio is automatically set when first used from the signal broadcast with DAB radio stations.
If a DAB station is not available, the clock may be set manually via the MENU system.
Set TIME / DATE: This is main option enables the clock to be set manually if there is no
available DAB transmission.
To set the time and date manually:
1) Switch on the unit, press and hold INFO / MENU button for 2 secs to enter MENU mode.
2) Turn the TUNE knob then enter “Set Time / Date” by following path:
Main menu > System setup > Time setup > Set Time / Date
Each step need to press Select, you will enter to below interface on display.
3) Turn the TUNE knob to set the hour, then press SELECT to confirm.
4) Turn the TUNE knob to set the minute, then press SELECT to confirm.
Set Date:
1) Turn the TUNE knob to set the day, then press SELECT to confirm.
2) Turn the TUNE knob to set the month, then press SELECT to confirm.
3) Turn the
TUNE
knob to set the year, then press
SELECT
to confirm.
You can also set the clock 12 / 24 Hr and date format at the same section.
Main menu > System setup > Time setup >
* Press Select to confirm in each step.
LISTENING TO THE FM RADIO
– For optimal reception, fully extend the antenna and adjust its position.
– You can store a maximum of 10 FM radio stations.
1) Press the FUNCTION button on the product or FUNC on remote control to select FM mode.
2) Press the PAIR / SCAN button. The unit will automatically start searching radio station.
When a station is found it will stop searching and you will hear the station.
3) If the station needs to be fine tuned to find the best reception turn the TUNE knob. Each
turn will change the radio frequency by 0.05 MHz.
The radio will search and the tuning frequency will be displayed whilst searching.
When a usable station is detected the radio will stop tuning and play the station. If RDS data is
present, the station name and scrolling radio text will be displayed. If RDS data is not present,
display will show [No RadioText].
STEREO / MONO RECEPTION
You can set your unit to switch between Auto and mono FM reception.
Press and hold
ST / MO
button to select audio mode in Auto (if receipt Stereo signal) or Mono.
STORING RADIO STATIONS (FM)
You can store any preset 1 – 10
1) Search for a station you want to store and then press and hold
PROG / PRE
button.