Gogen BPS 738, Руководство пользователя

Страница: 25 / 36

EN - 23
EN
RADIO OPERATION
Listen to FM radio broadcasts. Press the FUNCTION/ button on the unit, the display reads
FM and the radio frequency.
Note : The wired antenna is packed with the user manual as a separated accessory, insert the
wired antenna into the FM socket on the rear cabinet when listening to the radio, and extend the
wired antenna to its full length in order to get the best reception.
TUNING TO A RADIO STATION
If you know the station frequency that you want to tune to directly:
• Tune to a station by press the
:
/TUN+ or
9
/TUN- button repeatedly.
The station frequency is shown on the display..
To tune to a preset station:
• To tune to the next preset station, press the 10/FOLD./MEM.+ button.
• To tune to the previous preset, press the 10/FOLD./MEM. - button.
AUTO PRESET MEMORY / SCAN
To scan for stations within reception range and save them to preset memory automatically,
press and hold the PLAY/PAUSE/PAIR/SCAN button. After the unit is finished scanning,
the unit will automatically tune to preset number 1 (P01).
MANUAL PRESET MEMORY OPERATION
Choose which stations to save in preset memory instead of scanning automatically.
1. Use the
:
/TUN.+ or
9
/TUN.- button to tune to the station that you want to save as a preset
(e.g., 93.1).
2. Press the
P-MODE/M.
button. “
P01
” will flash on the display to indicate that you are saving
the station as Preset Memory 01. (To change the preset memory number, press the
10/FOLD./MEM.+ or 10/FOLD./MEM. - buttons.)
3. Press the P-MODE/M. button to finish saving the station (e.g., P01 is now set to 93.1).
4. To save another station, repeat steps 1 to 3. You may save up to 30 FM stations.
USB OPERATION
This unit provides one USB port for music playback.
1. Press the FUNCTION/ button on unit to select USB mode.
2. Plug the USB memory stick to the USB port on top of the unit. Playback will start
automatically from Track 1.
3. To pause playback, press the PLAY/PAUSE/PAIR/SCAN button on unit. The playing time
will flash on the display.
4. To resume playback, press the PLAY/PAUSE/PAIR/SCAN button again.
5. To select a desired track, press the
:
/TUN+ or
9
/TUN- button respectively during playing
until the desired track appears on the display. The unit will start play automatically.
6. To search for a particular passage during playback, press and hold the
:
/TUN+ or
9
/TUN-
button to scan the current playing track at high speed until desired point (passage) appears,
then release the button for normal playback mode.
7. To select a song which track number exceeds 10, press the 10/FOLD./MEM.+ or 10/FOLD./
MEM. - button each time to skip forward/backward 10 tracks, then press the
:
/TUN+ or
9
/
TUN- button to select desired track.
8. To select a desired folder (if the USB contains more than one folder), press and hold the
10/FOLD./MEM.+ or 10/FOLD./MEM. - button each time to skip forward/backward a folder,
then press the
:
/TUN+ or
9
/TUN- button to select desired track.
Important : The USB port is intended for data transfer only, other devices cannot be used with
this USB connection. The use of USB extension cords is not recommended. Don’t unplug the
USB from the unit when playing or reading the USB device .