5
Hardware Installation
Important:
The source USB-C output must
support DisplayPort Alternate (DP Alt) mode or
Thunderbolt 3 technology for this hub to work
properly. Please verify DisplayPort Alternate
mode over USB-C or Thunderbolt 3 with your
computer manufacturer.
1.
Power off all devices you plan to connect to
the unit.
2.
Connect the unit to your PC's USB-C
connector.
3.
Connect your DisplayPort monitors to the
unit's
DP Outputs
with DisplayPort cables
(not included).
4.
Power on all of the connected devices.
5.
The adapter is ready for use.
