5
•
Power plug :
Power adapter plug
•
Input LED :
On when the input signal is detected
•
HDMI input :
Connect to HDMI source device
•
EDID switches:
Please refer to the table below to configure
EDID. There are 4 settings.
Position
Setting
Mixed EDID
Copy EDID
1080p output
4Kx2K output (Default)
* Note:
When changing EDID mode, it's required to unplug the
power from the source device and plug it back again.
- Mixed EDID:
Read EDID information from display with the lowest
resolution and use that resolution for all HDMl outputs.
- Copy EDID:
Splitter2P:
Read EDID information from display
connected to Output 1 and use that resolution for
both HDMI outputs. If there's no display connected
to Output 1, Output 2 will display in 1080p resolution.
Splitter4P:
Read EDID information from display
connected to Output 4 and use that resolution for all
