®
PRO-KVMaud4P
10
MCU F/W update
1. Connect the Micro-USB to USB cable between PC and device
2. Set dip switch PIN#2 to ON[
] and then power on device
3.
Open firmware update software and then select COM Port
4.
Click “MCU“ button to open “Firmware Update MCU” windows.
5. Click “Load File“ button to select the file which you want to write into device.
6. Click the “Start“ button to start firmware update
7. After updating, please set the dip switch PIN#2 to OFF [
] and power cycle the
device
