®
PRO-HDRsplit2P
8. Installation
• Switch off all devices, including monitors.
• Connect to the displays.
• Connect an HDMI source (such as a Blu-ray Disc player)
to the HDMI In.
• Plug in 5V DC power supply.
• Power on the HDMI monitors.
• Power on the HDMI source.
Broadcasts HDMI signal to 2 HDMI displays!
If somehow user cannot get video output, please try to
adjust EDID dip switch to “[pin2,pin3,pin4]=[
-
-
]” or
“[pin2,pin3,pin4]=[
-
-
]” for trouble shooting. Under
“[pin2,pin3,pin4]=[
-
-
]”, there will be video output.
The only requirement is that the display has to support
at least Full HD. If default Full-HD EDID still cannot work,
user can switch to “[pin2,pin3,pin4]=[
-
-
]” to learn
the EDID from output 1 to customize the EDID informati-
on. (Please note that the display with lowest resolution
must be connected to output 1)
9. Notice
9
Select to [pin2,pin3,pin4]=[
-
-
] - Full-HD(1080p@60)
– 8bit 2D video & 2ch audio
1) Set the dip switch to “[pin2,pin3,pin4]=[
-
-
]”
2) Power on the device
1.
