7
Application Diagram
Transmitter (TX)
Receiver (RX)
IR Blaster
IR Receiver
Display
HDMI source
Pairing Instructions
This kit has been paired at the factory during
manufacturing. If the units are not operating properly,
please use the steps below for pairing them.
1.
Power on the transmitter and receiver units.
2.
Press and hold down the pairing button on both the
transmitter and receiver at the same time.
3.
When the LEDs begin to flash release both buttons.
4.
When the LEDs turn solid blue color, the pairing is
successful. Repeat the pairing instructions if the
LED does not turn solid blue color.
Figure 3: Application Diagram
