6
Product Layout
Front Panel
1. Power LED
Lights up when power is detected
2. Output LEDs
Lights up when HDMI ouput is active
3. Source Button and LEDs
A) Press to switch to the next source device, the
corresponding LED will light up
B)
Automatic Switching Mode*
: Press and hold
down for at least 3 seconds, the splitter will
automatically select the first available active
source device starting with HDMI Input 1.
*Note
: a) When a source device is connected or
turned on, the splitter will switch to it
automatically; b) When an active source device
is removed or turned off, the splitter will switch
to the next active source device automatically;
c) When the splitter is power cycled, it will
resume from the last device setup
C) To exit automatic switching mode, press and
hold down the button for at least 3 seconds
again
4. Display On Button and LEDs Press to turn on the displays. LED blinks when
the button is pressed
5. Display Off Button and LEDs
Press to turn off the displays. LED blinks when
the button is pressed
6. EDID
3-Pin DIP switch for EDID management. Refer
to EDID Management for details
7. Firmware (FW)
Micro USB port for firmware upgrade
Содержание HDSplit24
Страница 1: ...HDMI 2 0 2x4 Splitter 4K with Downscaling User s Guide G4 0049A P N HDSplit24...
Страница 8: ...8 ConnectionDiagram...
Страница 14: ...14 Blank Page...
Страница 16: ...Thank you for choosing gofanco www gofanco com...