7
4.
Optional: Connect the IR Blaster Extension
Cable to the Transmitter's IR output port.
Face the eye towards your HDMI source
device's IR window. This connection is
needed only if you need to control your
HDMI source from the remote location.
5.
Plug your CAT5e/6 cable between the
Transmitter's RJ45 Output and Receiver's
RJ45 Input.
6.
Connect your HDMI display to the
Receiver's HDMI ouput connector with a
HDMI cable (HDMI cable not included).
7.
Optional: Connect the IR Receiver Extension
Cable to the Receiver's IR input port. This
connection is needed only if you need to
control your HDMI source device from the
remote location.
8.
Plug the included power adapters into the
Transmitter's and Receiver's power jacks,
then plug both power adapters into a
reliable power source.
9.
Power on all connected devices.
10. The HDMI extender is ready for use.
