5
Product Layout
Figure 1: Transmitter and Receiver
No.
Name
Description
1
Mode Switcher
- CTRL: RS-232 pass-through
- UPDATE A: Firmware update mode
- UPDATE B: Update compression IC
2
Power LED
Red when power adapter is connected
3
HDMI IN (Transmitter)
Connects to your HDMI source
HDMI OUT (Receiver)
Connects to your HDMI display
4
3-Pin Terminal Block
(Transmitter)
RS-232 pass-through. Connects to your
computer's RS-232 port using the included
RS-232 cable
3-Pin Terminal Block
(Receiver)
RS-232 pass-through. Connects to your
end device's RS-232 port using the
included RS-232 cable
5
IR IN
Plug the IR Receiver Extension cable here,
receives signals from an IR remote control
6
IR OUT
Plug the IR Blaster Extension cable here,
transmitts the signals from an IR remote
control
7
HDBT OUT (Transmitter)
Connects to the HDBT IN of the Receiver
using a CAT5e/6 cable
HDBT IN (Receiver)
Connects to the HDBT OUT of the
Transmitter using a CAT5e/6 cable
8
DC 12V Power Jack
Plug the included power adapter into
either power jack, to power both units
