gofanco HD20Ext-LT, Руководство пользователя

Страница: 8 / 12

8
Hardware Installation
1. Power off all devices including your HDMI
source and HDMI display(s).
2. Connect your HDMI source device to the
Transmitter's HDMI In connector with an
HDMI cable (HDMI cable not included).
3. Optional: Connect your HDMI display to
the Transmitter's HDMI Out connector with
an HDMI cable (HDMI cable not included)
for local monitoring of the HDMI signal.
4. Optional: Connect the IR Blaster cable to the
Transmitter's IR Out port. Face the cable's
emitter eye towards your HDMI source
device's IR window. This connection is
needed only if you need to control your
HDMI source device from the remote
display location.
5. Plug a CAT6 cable between the Transmitter's
RJ45 Out and Receiver's RJ45 In.
6. Connect your HDMI display to the
Receiver's HDMI Out connector with an
HDMI cable (HDMI cable not included).