gofanco HD20Ext-Cas, Руководство пользователя

Страница: 8 / 16

8
Hardware Installation
1. Power off all devices including your HDMI
source and HDMI display(s).
2. Connect your HDMI source device to the
Transmitter's HDMI In connector with an
HDMI cable (HDMI cable not included).
3. Optional: Connect your HDMI display to
the Transmitter's HDMI Out connector with
an HDMI cable (HDMI cable not included)
for local monitoring of the HDMI signal.
4. Optional: Connect the IR cable to the
Transmitter's IR port. See the IR Application
on page 9 for proper cable connection.
5. Plug a CAT6 cable between the Transmitter's
RJ45 Out and Receiver's RJ45 In. If cascading
RXs is required, connect the RJ45 Out of the
former RX to the RJ45 In of the latter RX.
6. Connect your HDMI display to the
Receiver's HDMI Out connector with an
HDMI cable (HDMI cable not included).
7. Optional: Connect the IR cable to the
Receiver's IR port. See the IR Application
on page 9 for proper cable connection.