gofanco HD14Ext-EDID, Руководство пользователя

Страница: 5 / 12

5
Product Layout
Transmitter (TX) Front and Rear Panel
1. HDMI In : Connect to your HDMI source
2. EDID : EDID selector switch
•
RX : Slide the switch to the left to copy the
EDID from the HDMI display connected to
the Receiver's HDMI Out
•
TX : Slide the switch to the right to copy the
EDID from the display connected to the
Transmitter's HDMI Out (Loopout)
3. HDMI Out : Connect to an HDMI display
for local monitoring of the remote display
4. IR Out : Connect to the IR Blaster cable.
Point the IR eye at the source device's IR
window
5. Power LED : On when the TX is powered on
1 2 3 4 5 6 7 8
Figure 1: Transmitter Front and Rear Panel Layout