6.3 To allow your phone to "find" the Bluetooth headset, consult your phone's operation guide.
After you begin, it will take several seconds to pair the headset to your phone.
6.4 Your phone should display Bluetooth headset's name after pairing.
Choose "GBH808" and confirm.
6.5 You must enter PIN=0000; pairing is started after PIN confirmation.
6.6 Blue light should flash - instead of red and blue lights blinking alternately
- after pairing is successfully completed.
- Your phone will not find the headset if they have not been paired.
7 Using the headset
- Before carrying out any of the operations in this section, please ensure the headset is paired with
your mobile phone.
7.1 Erasing all remote information in headset
Pressing the volume down button about 5s, until the red and blue lights blinking alternately, and
then release the button, the headset will erase all stored remote information and enter pairing
status automatically.
7.2 Connect actively
After the pairing is finished, if the connection is disconnected for distance or others issues, you
can press MFB a short time to reconnect it while the headset is power up.
7.3 Making a Call
Make sure the headset is connected to your phone before you make a call.
The headset can support the function of "voice dialing" if your phone has this function. For details
on voice-dialing, see your phone's operation guide.
Voice dialing
Press the multi-function button for a short time, it indicates that you can now say interlocutor's
name.
- It is suggested that you should use your headset to record your dialing voice.
Using your phone's keypad
Dial number in the normal way. Your can hear in the headset when the call is connected.
Re-dialing the last dialed number
Press the main-function button until the headset beeps twice, the last dialed number is re-dialed.
- Your phone's settings determine whether there is keypad tone or not.
Adjust volume during your call is connected as indicated in item 7.6.
7.4 Answering an Incoming Call
Before using the headset to answer an incoming call, make sure that your headset is connected to
your phone.
7.4.1 When there is an incoming call, the ring tone is heard from the headset and the blue
indication light blinks quickly. Press the multi-function key until a confirmation tone is heard, the
call is connected.
7.4.2 If "automatic answer" function is set on your phone, the headset automatically answers the
call when it rings.
7.5 End a Call
