1 Introduction
1
1 Introduction
1.1 Notes on this Document
This document applies only to the device type
Easy CON
. Any handling of the device requires the exact knowl-
edge and observance of this manual. The operational safety and the function of the device can only be guaran-
teed if both the general safety and accident prevention regulations of the legislator and the safety instructions in
the manual are observed.
The manual is part of the product. Please make sure that all persons who operate the device have
read and understood the manual. Keep the manual in a safe place so that it can be used whenever
needed.
This guide highlights some important comments as follows:
Symbol
Description
Warning
that indicates risk situations and dangers. Disregard can lead to life-threatening situa-
tions.
Information
that indicates certain aspects or is important for a particular topic or goal.
Table 1.1 Symbols
1.2 Intended Use
The
Easy CON
by
GOEPEL electronics
connects automotive ethernet networks with standard LAN networks
with 100Base-Tx / 1000Base-T as physical layer or with USB 3.0.
Typical features are:
•
Coupling of Automotive Ethernet components to a standard PC
•
Support of both master and slave operation
•
Converting of Automotive Ethernet to USB 3.0, therefore no additional network interface on the PC is
necessary
•
Simple mode-selection by keypad on the top of the device
The system is not determined for other usage types than those listed here. Nevertheless, if you use it
for any purpose other than stated, then
GOEPEL electronics GmbH
can not be held liable for result-
ing damages.
The device is intended for indoor use only and to be used only at an ambient temperature of 0 ° C - +45 ° C. It
must not be exposed to extreme temperatures, temperature fluctuations, heating and cooling systems, direct
sunlight, high levels of dust, vibration and impact, extreme humidity or moisture.
The device is only to be used in a technically perfect condition as well as in accordance with its intended use, in
a safety-conscious and hazard-conscious manner, observing the operating instructions! In particular, faults that
may affect safety must be rectified immediately!