GOECO GMC205Pi Platinum Series, Руководство пользователя

Страница: 9 / 16

operation (cont’d)
To Put Back Into Auto Mode:
7. Press the green GoECO™ button on the control panel. The shredder is now in AUTO
mode, and when you insert papers into the paper throat, the shredder will
start automatically.
For Paper Jams:
8. If you insert more than the maximum number of paper sheets allowed and jamming
occurs, the machine will automatically go into reverse to push out the jammed papers.
To Turn Off:
9. There are 3 ways to stop the shredder where all power to the shredder will be shut off.
This also cuts off any phantom load power leakage.
a. Press the “STOP” button on the control panel.
b. Toggle the power switch on the rear panel of the shredder to “OFF”.
c. Or, do nothing, and the GoECO™ technology will turn off automatically 30 minutes
after shredding.
Door Open:
10. When the doors are open or ajar, the shredder will not start until the doors are
completely closed.
Overheating:
11. During long periods of continuous shredding, the shredder’s temperature will rise. A Red
LED light will warn the user. When the temperature reaches the maximum allowed level,
the shredder will automatically shut off the motor until it has cooled to an acceptable
temperature. The shredder will be ready to resume paper shredding when the motor has
sufficiently cooled.
Paper Clips And Staples:
12. Our shredders are designed primarily to shred paper, credit cards, CD’s or DVD’s
(as indicated). You should remove small paper clips and staples whenever possible to
prolong the life of the unit. You should not shred commercial staples, large paper clips
or binder clips.
7 operation