Godrej WT EON 650 PF, Руководство по обслуживанию

Страница: 14 / 37

Godrej & Boyce Mfg Co Ltd, HO Service, Mumbai SM 2073R -
Page
14 of 37
Slide the Rat Mesh into machine base from
back side of the machine as shown.
Installation of washing machine
Installing the rat guard
Tilt the washer on the front side and slide the Rat Mesh as shown in fig.1 and screw it to the base
as shown in the fig.2 3m or less
Installing the drainage hose

Insert the drainage hose in as far as it will go, then the secure it tightly with the hose clamp. An
improperly secured hose may leak.

While attaching the drainage hose to a wash pan, level a gap
between the end of the hose and the adjacent surface. If the flat end
of the hose comes in contact with a flat surface, drainage will be
affected.
Caution: If the drainage hose is not installed properly, washing
machine may not function well, and the overflow prevention
mechanism may cause the machine to stop in mid-cycle.

While inserting the drainage hose in to a wash pan or drain pipe,
move the hook for easier installation.

Move the hook back to its initial position before placing it in the slot
provided on the side of machine.

Make sure the drainage hose is not too high; otherwise it may not
drain properly.
Caution: If the drainage hose is kept level with the ground, the length of the drainage hose can
be extended up to 3 meter.
Use 2 nos. screws to fit the Rat Mesh
with machine bottom as shown.