Godrej WSEDGE PRO 85 5.0 PB3 M, Руководство пользователя

Страница: 15 / 24

After the wash & intermediate spin cycle, use the rinse cycle.
This helps to remove detergent from the clothes and makes
them soap-free. Rinsing can be done in two ways,
8.1 Overflow Rinse
In this mode water is continuously supplied to wash tub during
rinsing and the dirty water flows out through the drain hose. In
this mode very efficient rinsing can be done since concentration
of detergent in water is lowered significantly.
Transfer the wash clothes from spin tub to wash tub after
intermediate spin cycle .
Shift the water selector knob to Wash position
Ensure drain lever is closed .
Start the flow of water & set the wash timer to 5-10 minutes
and rinse under continuous water flow.
After rinsing cycle is over, pull up drain lever. This will drain
out the water from wash tub.
Transfer the clothes to spin tub for intermediate spin.
It is recommended to repeat this process two or three times
for best results.
Caution
Adjust the water flow while looking at he water level or water
may spill out (Refer Image A).
Cover the wash tub with wash lid while rinsing using Overflow
rinse option as this will prevent water spilling / splashing.
8.2 Rinsing with fixed amount of water
Transfer the washes clothes from the spin tub to the wash tub
after intermediate spin cycle.
Shift the water selector knob to Wash position.
Ensure drain lever is closed.
Maintain the water level to High (Refer Image A).
Set the wash time to 5-10 minutes for rinsing.
After rinsing cycle is over, pull up drain lever. This will drain
out the water from wash tub.
Transfer the clothes to spin tub for intermediate spin.
It is recommended to repeat this process two or three times
for best results.
Image A