4
Make sure the power supply voltage is correct before using the camera.
•Do not drop the camera or subject it to physical shock.
• Do not touch sensor modules with fingers. If cleaning is necessary, use a clean
cloth with a bit of ethanol and wipe it gently. If the camera will not be used for an
extended period, replace the lens cap to protect the sensor from dirt.
•Do not aim the camera at the sun or extra bright places. Blooming or smearing may
occur (which is not a malfunction), and aect the sensor’s endurance at the same
time.
•The sensor may be burned out by a laser beam, so when any laser equipment is in
use, make sure that the surface of sensor will not be exposed to the laser beam.
• Do not place the camera in extremely hot, cold (the operating temperature shall be
-10°C to +40°C), dusty, or damp locations, and do not expose it to high
electromagnetic radiation.
•To avoid heat accumulation, ensure that there is good ventilation to the device.
• Keep the camera away from liquids.
• While in delivery, pack the camera in its original, or equivalent, packing, packing
materials. Or packing of the same texture.
• Regular part replacement: a few parts (e.g. electrolytic capacitor) of the equipment
shall be replaced regularly according to their average endurance. The average time
varies because of dierences between operating environments and usage history,
so regular checking is recommended for all users. Please contact your dealer for
more details.
• Improper use or replacement of the battery may result in hazard of explosion.
Replace with the same or equivalent type only. Dispose of used batteries according
to the instructions provided by the battery manufacturer.
•If the product does not work properly, please contact your dealer or the nearest
service center. Never attempt to disassemble the camera yourself. (We shall not
assume any responsibility for problems caused by unauthorized repair or
maintenance.)
Cautions
