background image

HOT KEY – Viewing/Not Viewing Password While Keying In:

If your lock is set so that your code appears and you need it to not appear one time, you can 
press 

(0)

 then 

LOCK(#)

 key before your code. Only dashes will appear for that one time. The 

next time you press your code it will appear as usual.

Likewise, if your lock set up so that your code does not appear, you can press 

(9)

 then 

LOCK(#)

 and your code will appear for that one time only.

This function applies to all modes (Home mode, Hotel mode& Safety mode).

TO ACCESS THE PROGRAMMING

Open the safe

Press 

CLEAR(*)

 twice, the display will show 

“PROG”

Press 

751019&LOCK(#)

 while the word 

“PROG”

 disappears.

The current setup will appear with the first digit flashing

All 6 sections must be entered within 10 seconds. You can change all sections or as 
few as one section but all 6 sections must be entered if you are making any changes to 
section 1-6. To keep a section programmed as it is currently set, simply press the 
same numbers that are currently displayed for that section and press 

LOCK(#)

The display will show the Date setup. Enter the correct date, then press 

LOCK(#)

The display will show the Time setup. Enter the correct time, then press 

LOCK(#)

The display will go blank

To set up the different features listed below, you must first decide how you want the safe 
to function.

st

Section 1 (1  Digit) Code appearance on display

Press 0: If you DO NOT want your code to appear on the display (only dashes will appear) 
with beep sound when you press each key button. (Default)

Press 1: If you want your code to appear each time you press your code.

nd

Section 2 (2  Digit) Preferred number of digits in your code

Press 3: To use a 3-digit code.

Press 4: To use a 4-digit code.

Press 5: To use a 5-digit code.

Press 6: To use a 6-digit code.

Press 7: To choose the length of code (3-6 digits) when you set the code. (Default)

th

Section 3 (4  Digit) Master code

The master code will open the safe if you lose the code and override keys. The master 
code is preset at the factory. 

5

Содержание E-SWIPE













Отзывы: