Godrej CL EDGE CB D 107 D BFT5, Руководство пользователя и гарантийный талон

Страница: 5 / 28

*In select variants
FUNCTION AND FEATURES:
HUMIDITY CONTROL
To operate the water flow on honeycomb pads, use the
HUMIDITY CONTROL knob placed in the ice chamber.
For maximum water flow turn the HUMIDITY CONTROL
the knob completely to 'AUTO DRAIN'. Avoid poiniting
the knob at the centre (As marked in the figure)
Auto Cool Function*
Temperature based fan speed selection and pump control
Auto Soak Function*
The pump will be ON initially for 90 secs for soaking the Honeycomb pads.
After 90 secs, Pump will be ON with previous setting.
Quick Chill Function*
Fan will run in Turbo mode along with pump and swing for 1 hour,
then it will switch back to previous mode.
Timer Function*
The maximum time setting is 8 hours.
Memory Backup*
Resumes previous setting after a power reset, except for timer function.
Eco Mode Function*
The fan speed and pump control are appropriately selected to provide optimum
cooling and thus enable energy and water saving.
Ionizer Function*
Ionizer function for a clean air experience. To be used as per comfort level of user,
as excessive use may have side effects.
Water Filling
Open the water inlet door and fill water up to the overflow hole on the tank.
Water level indicator shows the level of water in the tank.
Speed Control
There are up to 4 speed variants that are low. turbo*, high, medium, and
LED Display*
Display indicates temperature and timer. It goes off after a few minutes of inactivity.
IDIT
M
Y U
H
(5) ^maV H$m nhbm Egr dmbm BÝìhQ>©a E`a Hw$ba Q>oŠ Zmobm°Or