Godox V860 II, Инструкция по эксплуатации

Страница: 12 / 22

Set the master unit’s flash
5
mode to <ETTL>.
●
Set the master unit’s flash
mode to < ETTL >.
● For shooting, < ETTL > will
automatically be set for the
slave unit.
● Set the master unit flash
firing as ON to fire a flash.
Check that the flash is
6
ready.
●
Check that the master flash
ready indicator is lightened.
● When the slave flash ready
indicator is ready, the AF-
assist beam lighting area
will blinks at 1 second
intervals.
Check the flash operation.
7
●
Press the master unit’s
Test Button < >
.
● Then, the slave unit will
fire. If not, adjust the slave
unit’s angle toward the
master unit and distance
from the master unit.
Using Automatic Wireless Flash with Multiple Slave Units
When stronger flash output or
more convenient lighting operation
is needed, increase the number of
slave units and set it as a single
slave unit.
To add slave units, use the same
steps as setting “automatic
wireless flash with a single slave
unit”. Any flash group can be set
(A/B/C).
When the number of slave units is
increased and the master unit
flash firing is ON, automatic
control is implemented to make all
groups of flashes fire the same
flash output and ensure the total
flash output up is to standard
exposure.
●
Press the depth-of-field preview button on the camera to fire a modeling
flash.
●
If the slave unit’s auto power off function is workable, press the master
unit’s test button to power it on. Please note that test firing is unavailable
during the camera’s regular metering time.
●
The effective time of slave auto power off is changeable. (C.Fn-Sv APOT
Page 77)
●
By making some settings, the auto AF-assist transmitter will not blink after
the slave unit’s flash ready indicator is lightened. (C.Fn-AF Page 77)
Using Fully Automatic Wireless Flash
The FEC and other settings that set on the master unit will also be
appeared on the slave unit automatically. The slave unit does not
need any operation. Use the following settings to make wireless
flashes according to the same methods with normal flash shooting.
●
Flash Exposure Compensation ( Page 51)
●
Flash Exposure Bracketing ( Page 52)
●
Flash Exposure Lock (Page 52)
●
High-Speed Sync ( Page 53)
●
Manual Flash (Page 54)
●
Stroboscopic Flash (Page 55)
SYNC
FEB
About Master Unit
Use two or more master units. By preparing several cameras that
with master units flash attached, cameras can be changed in
shooting while keeping the same lighting source (slave unit).
5. ETTL: Use the Wireless Shooting of Flash Ratio
Auto Flash Shooting with Two Slave Unit
Divide the slave units into A and B groups and balance their shooting
illumination (flash ratio).
Auto control exposure to make the total output of A and B flash
groups up to standard exposure.
Setting the flash groups of
1
slave unit.
●
Set the flash as slave unit.
● Press Function Button 3
< > and choose
< A > or < B >.
● Set one slave unit as < A >,
the other as < B >.
Gr
MENU 2
RATIO
Setting < >.
2
●
Step 2 to Step 4 are set on
the master unit.
●
Press the Function Button
4 on the master unit so that
< > is displayed. MENU 2
Setting <RATIO A:B>.
3
●
Press Function Button 2
< > so that
< RATIO A:B > is displayed.
- 61 - - 62 -