Godox V1C, Руководство пользователя

Страница: 17 / 205

17
1. Focus the subject
2. Press the <FEL> button.
•
Aim the subject at the center of the viewfinder and press <FEL> button.
•
The camera flash will fire a preflash and the required flash output for the subject
in retained in memory.
•
Each time the <FEL> button is pressed, a preflash will be fired and a new flash
exposure setting will be locked.
•
If the subject is too far away and underexposure, the < > icon will blink in the
viewfinder. Move closer to the subject and try the FE lock again.
•
If <ETTL> is not displayed on the LCD panel, FE lock cannot be set.
• If the subject is too small, FE lock might not be very effective.
High-Speed Sync
High Speed Sync (FP flash) enables the flash to synchronize with all camera shutter
speeds. This is convenient when you want to use aperture priority for fill-flash portraits.
Press Function Button 2 <SYNC> so that
<
> is displayed.
Check that < > is displayed in the
viewfinder.
•
I f you set a shutter speed that is the same as or slower than the camera’s
maximum flash sync speed, < > will not be displayed in the viewfinder.
•
With high-speed sync, the faster the shutter speed the shorter the effective flash
range.
•
To return to normal flash, press <SYNC> button again. Then < > will disappear.
•
Multi flash mode cannot be set in high-speed sync mode.
•
Over-temperature protection may be activated after 15 consecutive high-speed
sync flashes.