Godox UL150IIBi, Инструкция по эксплуатации

Страница: 16 / 21

4.8 Version & Upgrade
The Version Code displayed on the
Version & Upgrade interface is the
firmware version of the product.
4.5 Screen Bright
Turn the SET adjustment dial on the
screen bright setting interface to
choose 1, 2, 3 levels of screen
brightness.
4.6 Language
Turn the SET adjustment dial on the
Language interface to choose English or
Simplified Chinese.
4.7 Reset
Turn the SET adjustment dial on the Reset
interface to choose “Yes” or “No” and short
press to confirm. If you choose “Yes”, the
system will initiate resetting program and
resetting progress bar is displayed on the
screen, after which it will return to the main
interface.
Note: The brightness will change to 100
％
after resetting.
V 0.07
Version&Upgrade
Power offand insert
USB disk with new firmware
Restart to upgrade
ENGLISH
NO YES
4.3 DMX
The DMX Setting interface is displayed
with Mode and Address. Short press the
SET adjustment knob to choose between
mode and address,then turn it to set
mode and address.
4.4 Dimmer
Turn the SET adjustment dial on the
Dimmer interface to choose
linear/S-curve/exponential/logarithmic
dimming curve.
ADDRESS: OFF
Dimmer
29 30
DMX Practical Form
ULTIMATE 8bit
n
（
Mode
）
0-51(CCT)
DMX*(100/255) Integer
0-100% Brightness Adjustment
CCT=28+DMX*(Total CCT/255)
CCT 2800K-6500K
DMX*(100/255) Integer
0-100% Brightness Adjustment
52-255(FX)
DMX*(Total FX/255)
0-85
：
FX Level
Ⅰ
86-171
：
FX Level
Ⅱ
172-255
：
FX Level
Ⅲ
1. For example
：
Total FX 8
，
DMX=160,
FX No.=160*8/255=5
n+1
n+2
n+2
n+3
Note
CCT 8bit
n
DMX*(100/255) Integer 0-100% Brightness Adjustment
CCT=28+DMX*(Total CCT/255) CCT 2800K-6500K
n+1
FX 8bit
n DMX*(100/255) Integer 0-100% Brightness Adjustment
DMX*(Total FX/255)
0-85
：
FX Level
Ⅰ ，
86-171
：
FX Level
Ⅱ，
172-255
：
FX Level
Ⅲ
n+1
Operating
Mode
Address
Code
Operating
Mode
Address
Code
Operating
Mode Address
Code
MODE:CCT 8bit