Godox SL200IIBi, Инструкция по эксплуатации

Страница: 6 / 11

- 09 - - 10 -
When using your photographic equipment, basic safety precautions should
always be followed, including the following:
1. Read and understand all instructions before using.
2. Close supervision is necessary when any appliance is used by or near children.
Do not leave appliance unattended while in use.
3. Care must be taken as burns can occur from touching hot parts.
4. The appliance switch is provided with the symbols 0 indicating off and 1
indicating on. The symbols and may be used for this purpose.
5. Do not operate appliance with a damaged cord or if the appliance has been
dropped or damaged – until it has been examined by a qualified serviceman.
6. Position the cord so that it will not be tripped over, pulled, or contact hot
surfaces.
7. If an extension cord is necessary, a cord with a current rating at least equal to
that of the appliance should be used. Cords rated for less amperage than the
appliance may overheat.
8. Always unplug appliance from electrical outlet before cleaning and servicing and
when not in use. Never yank cord to pull plug from outlet. Grasp plug and pull to
disconnect.
9. Let appliance cool completely before putting away. Loop cord loosely around
appliance when storing.
10. To reduce the risk of electric shock, do not immerse this appliance in water or
other liquids.
11. To reduce the risk of electric shock, do not disassemble this appliance, but take
it to a qualified serviceman when service or repair work is required. Incorrect
reassembly can cause electric shock when the appliance is used subsequently.
12. The use of an accessory attachment not recommended by the manufacturer
may cause a risk of fire, electric shock, or injury to persons.
13. Connect this appliance to a grounded outlet.
14. Disconnect this unit from its source of supply before replacing the projection
lamp.
15. This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not modify the plug in any way.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Thank you for purchasing!
Bi-Color LED Video Light SL200IIBi, upgrade version of SL200II, gets all the excellent
quality and performance of SL200II, and adds flexibility of expansive color temperature
range, bringing photographer a more creative shooting experience. Light body 360°rotated
offers excellent flexibility for more shooting angles. Power output up to 200W, strong
power and stable output. Built-in 9 FX special provides more creative possibilities. This
LED light can benefit interviews, broadcasting, cinematography, online streaming, studios,
location shooting and other shooting occasions, with a wide range of applications.
Features:
• With color temperature adjustment from 2800K to 6500K.
• With 9 FX lighting effects mode to simulate various of shooting scene.
• Silent mode: without noises and interference.
• Built-in Godox 2.4G wireless & wirelessly adjust parameters.
• With stable light source and 0% to 100% precise light adjustment.
• With 16 groups and 32 channels wireless control.
• With U-type bracket to adjust different angles easily.
• Bowens-mount enables to install various of accessories.
• Clear LCD Screen.
• Excellent heat dissipation.
Always keep this product dry. Do not use in rain or in damp conditions.
Do not disassemble. Should repairs become necessary, this product must be sent to
an authorized maintenance center.
Keep out of reach of children.
As this product do not have waterproof function, please take measures of
waterproof in rainy or damp environment.
Do not use the product in the presence of flammable gases, chemicals and other
similar materials.
CAUTION: Hot parts!When the product is always on and flickering,please do not
touch the high temperature part of the LED head.
When replacing product accessories,please turn off the LED light and perform a cold
cut.
The light source contained in this luminaire shall only be replaced by the
manufacturer or his service agent or a similar qualified person.
The lamp shall be changed if it has become damaged or thermally deformed.
The luminaire is intended for professional use only.
Foreword
Warning