Godox PT-16, Руководство пользователя

Страница: 6 / 12

Troubleshooting Maintenance
1. Unable to trigger a flash by pressing Test Button or the
1. Avoid sudden drops. The device may malfunction after
camera's shutter-release button.
strong shocks or impacts.
Make sure batteries are installed properly and the trigger set
2. Keep dry. The device is not water-proof. Malfunction, rust,
is powered on.
and corrosion may occur and the device may go beyond
Check if the transmitter and the receiver are set to the same repair if immersed in water or expose to high humidity.
channel. If not, set to the same position.
3. Avoid sudden temperature changes. Condensation may
Check if the trigger set is securely seated into the camera's happen if the ambient temperature changes suddenly, for
hot shoe. example, in a case when the trigger set is taken out of a
build with a high temperature to outside in winter. Please put
2. Signal disturbance or shooting interference.
the trigger set in a handbag or plastic bag beforehand.
Change a different channel on the trigger set.
4. Keep away from strong magnetic field. The strong static
3. Short workable distance or flash missing.
or magnetic field produced by devices such as ratio
Check if batteries are exhausted. If so, replace with new
transmitters leads to malfunction.
batteries.
PT-16
3V (2*AA Ni-MH or alkaline batteries )
5V (powered by flashes)
2.4GHz wireless remote system
Over 100m / 328ft (open areas)
Flash power ratio
Modeling lamp or AF-assist beam on/off
Buzzer on/off
Power-ratio display mode
Flash triggering
1/250 second
16
Model
Transmitter Power Supply
Receiver Power Supply
Transmit Frequency
Workable Distance
Control on Flashes
Max. Sync. Speed
Channel
PT-16S 97.6*49.9*36.95mm
A set: approx. 80g
Only receiver: 20g
57*30*26.5mm
Transmitter Dimension
Net Weight
Receiver Dimension
A set: approx. 70g
Only receiver: 10g
55*27*9mm
Model
PT-16
PT-16S
Fit flashes
Godox Witstro outdoor
flash, Quicker, Quicker D,
QT, QS, Gemini GT,
Gemini GS, DE, and DP
series studio flashes.
Godox Ving camera flash
Fit cameras
Canon, Nikon,
Pentax,
Olympus, etc.
Includes
Transmitter
Receiver PTR-16
Transmitter
Receiver PTR-16S