Godox MC-C1R, Инструкция по эксплуатации

Страница: 15 / 20

Operation:
1) First switch off the camera.
2) Put the plug of the receiver into the camera, and turn on both
of them.
3) Press the shutter release switch of the transmitter, and make
sure the LED indicator blinks consistently with the receiver LED
indicator, then they works.
4) Bulb Shutter:Set your camera to Bulb mode. Long press the
transmitter’s button, the red LED indicator lights and wait until it
goes out (approximately three seconds). If the red LED indica-
tor on the receiver is light, it indicates Bulb shutter function is
carrying on;To cancel this function, please press the
transmitter’s button again.
The Low Battery Indicator:
LED indicator on receiver blinking fast when the batteries are
low, ready change batteries.
Replacing Batteries:
When replacing batteries on transmitter or receiver:
1) Check the receiver is on the “off” position
2) Turn the camera off and disconnect the receiver
3) Remove the batteries.
09 10
EN EN