Operation
1
、
Before Usage
•
Insert the lithium battery or connect the
light with the DC power supply.
•
Switch the power on, the video light
giving out light.
•
Press the STOP/RUN Button to light up
and shut down the LED lights.
•
LCD panel shows the information.
2
、
Light Brightness/Color Temperature Adjustment
Adjusting Light Brightness
•
Turn the select dial to adjust the light brightness.
Temperature
3300K~5600K
±
300K
Light Brightness Range
10%~100%
Model
LEDP260C
Adjusting Color Temperature
•
Press the SET button once and the color temperature icon blinks.
•
Turn the select dial to adjust color temperature.
Color temperature range
3300K~5600K
Model
LEDP260C
3
、
Wireless Remote Control
•
With 433 MHz wireless system, this product
has remote grouping and control function. Up
to 6 groups of LED light can be controlled. 16
channels are available with strong anti-
interference capability.
Please set the channels and groups of LED
video light to the same as those of remote
control before usage.
Adjusting Channel/Group of the LED Video Light
•
Press the
CH/GR
button and the group icon blinks. Turn the select dial to choose
a group ID (A to F).
•
Press the
CH/GR
button twice and the channel icon blinks. Turn the select dial to
choose a channel ID (1 to 16).
Note: The wireless signal can be received only when the LED light is power on.
LED Video Light
LED Video Light
Lithium Battery
DC Power Supply
Power
Color Temperature
Channel
Group
Brightness (LUX)
Color Rendering Index
TLCI
Light Brightness Range
LED Beads Quantity
Operation Temperature
Dimension
Net Weight
Technical Data:
*
Product design and specifications are subject to change without notice.
Changeable Version LEDP260C
7.4V Lithium Battery (SONY NP-F970 model lithium battery)
13-16.8V
Max. 30W
3300K~5600K±300K
16
6 groups (A, B, C, D, E, F)
2050 (0.5 m/4500K)
2050 (0.5 m/3300K)
2200 (0.5 m/5600K)
>95
≥94
3300K~5600K: 10%~100%
5600K: 128
3300K: 128
-10~40°C
360mm*240mm*27mm
917g
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- 11 -
- 12 -
