Godox LC500, Инструкция по эксплуатации

Страница: 9 / 11

*
Product design and specifications are subject to change without notice.
Technical Data
Model
Built-in Lithium Battery
Power
Double Color Temperature
Channel
Group
100% Light Brightness(LUX)
TLCI Index
CRI Index
Light Brightness Range
LED Beads Quantity
Operation Temperature
Dimension
Net Weight (without reflector)
LC500
14.8V/2600mAh lithium battery
Max. 18W
5600K±300K
3300K±300K
16
6 (A, B, C, D, E, F)
1200 (1 m)
≥ 95
>95
10%~100%
516
-5~50°C
565*56*56mm (reflector is not included)
760g
Note: The wireless signal can be received only when the LED Light Stick is
power on.
Other Operation Tips
●
Pressing the ON/OFF button on the remote control can turn on/off all the LED
groups.
●
Pressing the “SET” button on the remote control for 2 seconds can only turn on/off
the current LED group.
●
The remote control will auto power off after four hours of idle operation.
Tips of Using Remote Control:
(
1) When using the cold temperature light, please set the color temperature of the
remote control as 5600K constantly.
(2) When using the warm temperature light, please set the color temperature of the
remote control as 3300K constantly.
(3) Please remove the battery if the light will not be used for an extended period of
time.
- 15 -
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.