Godox FT-16 Скачать руководство пользователя страница 8

 

 

 

 

 

 

 

 

 

 

 

Changes or modifications not expressly approved by the party responsible for 

compliance could void the user's authority to operate the equipment

 

Note: This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference in a residential installation. 
This equipment generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful interference 
to radio communications. However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does   
cause harmful interference to radio or television reception, which can be determined 
by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:   
—Reorient or relocate the receiving antenna.   
—Increase the separation between the equipment and receiver.   
—Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected.   

—Consult the dealer or an experienced radio/TV technician for help.

 

 

 

FCC ID: 2AAJJFT-16 

This device complies with Part 15 of the FCC Rules. Operation is 
subject to the following two conditions: (1) this device may not cause 
harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation.

 

Содержание FT-16









Отзывы: