9
①
GT100+ is connected to the vehicle OBD2 port.
②
Start the Power switch, and GT100+ will display the current accumulator voltage. (If no voltage is
displayed, please check the vehicle diagnostic interface and the cable. If the voltage is lower than 10V,
please do not start the vehicle or go ahead for function operation, Please charge the car with a car
charger.)
③
Connect the diagnostics / programming / coding tool well. When it communicates with the vehicle, the
corresponding protocol indicators on the GT100+ equipment will be lit up or blink. It’s convenient for
users to observe which protocol is under use by the vehicle module and the status of the
communication.
3.) GT100+ program key for VW, Porsche, Mitsubishi etc with all keys lost - activate the instrument or
immobilizer module.
A. To program VW 4th generation / 5th generation Lost all keys (for example: new A6L Touareg A4 Q5 A7),
please use GT100+ to short-circuit banana connector PIN 16----PIN 1 to lit up the dashboard, aft that use
the key programmer tool to connect with the female adapter of GT100+ for data collection. Some vehicle
dashboards won't be lit up, but data can also be collected, for example: A6L Q7.
