Goddess SCA 403 Fit2Fit, Инструкция по эксплуатации, Страница: 34 / 40

ENG
ENG - 34
[2] WEIGHT MEASUREMENT - using the floor unit together with the remote unit
► Press the ON or OFF key once on the remote unit.
►The display shows 1-10 and flash.
► Press the UP or DOWN button to selected the weight unit.
► The display flashes about 65 times and automatically enters weighting mode.
► „8888“ is displayed.
► Step on the floor unit, the display will first show „8888“ and then „--“ .
► Atand steadily on the unit and your weight will be displyed for 10 seconds both on the floor
unit and in the remote unit.
► The display then returns to 0.0 and before the units turns off another user can step on the
floor unit for measurement. Other wise the unit turns off automatically about 10 seconds.
[3] Body Fat Analysis using the remote unit only
The remote unit is fitted with sensors that can measure body fat and other data. If you already
know your correct weight, you can use the remote unit independently from he floor unit.
To make body fat and other data analysis, you must first set your personal data just as gender,
height, age and weight. You must also select a user number to facilitate the memory function.
The default setting is:kg, man,170cm, 30 years old and 60 kg.
Press the ON/OFF button once on he remote unit.
Press the SET button and the unit enters setting mode. The USER
NUMBER will flash. You can choose any number from 1 o 10.
Press the UP or DOWN button to select the number. Stop at the
number your require.
Press the SET button to confirm.
The UNIT OF WEIGHT now is activated and flashing.
Press the UP or DOWN button to change to lb or st
Stop at the requied unit and press the SET button to confirm.
1)
2)
3)
4)
5)
6)
7)