ENG
ENG - 32
FRONT PANEL
Place the FRONT PANEL onto the recessed area on the BOTTOM PANEL.
Align both sides of the front panel to the the side panels and screw them together (Image 7).
Make sure the front and side panels are horizontally aligned.
Image 7
Image 8
TOP PANEL
1)
Place the TOP PANEL so the CONTROL BOX is upside (image 9).
NOTE:
Be careful of the connector cables of the SIDE PANELS while you place the TOP
PANEL. The connector cables should be inserted in the panels as much as possible.
The front and rear panels should align with the holes of the TOP PANEL in order to pass
the connector cables through to the TOP PANEL. Pass the cables through before lowering
completely the top panel. Failure to do so could damage the cables.
2)
Lower the TOP PANEL into place and make sure ail the edges are well in place.
CONNECTING THE CABLES ON THE TOP PANEL
1)
Connect all cables according to their respective
markings.(Image 9)
Image 9
NOTE:
Do not connect the power cord from the TOP COVER in an AC wall outlet before
the installation is completely finished.
