Goddess FSD 0142 TW8AF, Инструкция по эксплуатации

Страница: 51 / 104

EN
EN - 51
WARNING!
It must be possible to disconnect the appliance from the mains power supply; the plug
must therefore be easily accessible after installation.
Electrical connection
à
Before plugging in, ensure that the voltage and frequency shown on the rating plate
correspond to your domestic power supply. The appliance must be earthed. The power
supply cable plug is provided with a contact for this purpose. If the domestic power
supply socket is not earthed, connect the appliance to a separate earth in compliance
with current regulations, consulting a qualified electrician.
à
The manufacturer declines all responsibility if the above safety precautions are not
observed.This appliance complies with the E.E.C. Directives.
IV. REVERSE DOOR
Tool required: philips screwdriver, flat bladed screwdriver, pliers.
à
Ensure the unit is unplugged and empty.
à
All parts removed must be saved to do the reinstallation of the door.
à
It’s better that 2 people handle the unit during assemly.
1. Using a flat-blade screwdriver, remove the plastic door hinge
mount cover at the top right - and also the hinge hole cover
on the left.
2. Remove the hinge mount on the right side - by unscrewing
the 2 Phillips screws. Place the loose door on a soft
surface to prevent damage.