Goddess DFE1267DW10N, Инструкция по эксплуатации

Страница: 91 / 124

ENG
ENG - 91 ENG - 90
WARNING!
Never run the dishwasher without the filters in place. When cleaning the filters, don‘t knock on them.
Otherwise, the filters could be contorted and the performance of dishwasher could be debased.
Cleaning the Spray Arms
It is necessary to clean the spray arms regularly for hard
water chemicals will clog the spray arm jets and bearings. To
remove the spray arms, screw off the nut clockwise to take out
the washer on top of the spray arm and remove the arm. Wash
the arms in soapy and warm water and use a soft brush to
clean the jets. Replace them after rinsing thoroughly.
Caring for the Dishwasher
To clean the control panel, use a lightly dampened cloth then
dry thoroughly.
To clean the exterior, use a good appliance polish wax.
Never use sharp objects, scouring pads or harsh cleaners on
any part of the dishwasher.
Protect Against Freezing
If your dishwasher is left in an unheated place during the winte r, ask a service technical to:
1) Cut off electrical power to the dishwasher.
2) Turn off the water supply and disconnect the water inlet pipe from the water valve.
3) Drain water from the inlet pipe and water valve. (Use a pan to catch the water)
4) Reconnect the water inlet pipe to the water valve.
5) Remove the filter in the tub and the bottom and use a sponge to use up water in sump.
Cleaning the Door
To clean the edge around the door, you should use only a soft warm, damp rag. To prevent
penetration of water into the door lock and electrical components, do not use a spray cleaner of
any kind.
Also, never use abrasive cleaners or scouring pads on the outer surfaces because they will
scratch the finish. Some papers towels can also scratch or leave marks on the surface.
WARNING!
Never use a spray cleaner to clean the door panel for it could damage the door lock and
electrical components. It is not allowed to use the abrasive agent or some paper towel because
of the risk of scratching or leaving spots on the stainless steel surface.
HOW TO KEEP YOUR DISHWASHER IN SHAPE
■ After Every Wash
After every wash, turn off the water supply to
the appliance and leave the door slightly ajar
so that moisture and odors are not trapped
inside.
■ Remove the Plug
Before cleaning or performing maintenance,
always remove the plug from the socket. Do
not run risks.
■ No Solvents or Abrasive Cleaning
To clean the exterior and rubber parts of
the dishwasher, do not use solvents or
abrasive cleaning products. Use only a cloth
and warm soapy water. To remove spots or
stains from the surface of the interior, use
a cloth dampened with water and a little
white vinegar, or a cleaning product made
specifically for dishwashers.